ThinkAerialAUTONOMUS SYSTEMS

Home / Blog

Guides · 4 min read

GSD explained: how sharp should your drone map be?

Ground sampling distance (GSD) is the real-world size of one pixel in a drone map. Learn the formula and how flying height changes it.

18 November 2026 · ThinkAerial team

GSD (ground sampling distance) is the distance on the ground covered by one pixel of a drone image. A GSD of 3 cm means each pixel is 3 cm wide on the ground. Smaller GSD means a sharper map, but it also means flying lower and covering less area per flight.

The formula

GSD = (sensor width × flying height) ÷ (focal length × image width)

Use the same units for sensor width and focal length (usually millimetres), and image width in pixels. Flying height in metres then gives a GSD in metres per pixel.

Example: a camera with a 13.2 mm wide sensor, 8.8 mm focal length and 5472 px image width, flown at 100 m:

GSD = (13.2 × 100) ÷ (8.8 × 5472) = 0.0274 m, which is about 2.7 cm per pixel.

What changes GSD

  • Flying height: double the height and you double the GSD, so the map is half as sharp.
  • Focal length: a longer lens gives a smaller GSD at the same height.
  • Sensor and resolution: more pixels across the same sensor give a smaller GSD.

What GSD do you need?

It depends on the job. Large-area mapping and corridor surveys are often flown at a few centimetres per pixel. Fine inspection of cracks and defects needs much smaller values and usually closer, targeted flights. As a typical reference for mapping projects, our orthomosaics are delivered at a GSD of about 4 to 6 cm, and we agree the target with the client for each project.

GSD is not the same as accuracy

GSD is the pixel size. Accuracy is how close the map is to the real position. Accuracy also depends on GPS quality, ground control points, overlap and processing. A sharp map can still be offset if it is not controlled properly.

Why it matters in the field

If wind, terrain or a mistake changes the flying height, the real GSD drifts from the plan. In hilly ground a fixed height above takeoff means the drone is closer to the ground on high points, giving a smaller GSD there and larger GSD in valleys. Terrain-follow flying keeps height above ground constant. Our flight app TAFLY plans terrain-follow missions, and TAQC checks overlap and GSD after the flight so gaps are caught before the team leaves site.

New to the outputs? Read what photogrammetry is.

Next step

See it live in a quick call

Tell us what you do. We will show you the products and hardware that fit, on a short video call.

Book a quick call Chat on WhatsApp