ThinkAerialAUTONOMUS SYSTEMS

Home / Blog

Guides · 5 min read

LiDAR vs photogrammetry: which one do you need?

Drone LiDAR and photogrammetry both make maps and 3D models, but they see differently. Here is how to choose for your site.

18 November 2026 · ThinkAerial team

Both technologies turn a drone flight into a 3D picture of the ground. They work in completely different ways, and that decides which is right for your job.

How each one works

Photogrammetry uses a camera. Software matches points across overlapping photos and rebuilds the scene in 3D. It captures colour and texture.

LiDAR uses a laser scanner. It sends out pulses of light and times their return. Each return becomes a measured point, so the survey is a dense cloud of points with accurate heights.

The key difference: vegetation

A camera sees only the top surface. If the ground is covered by trees, the model shows the treetops. A LiDAR pulse sends many returns, and some of them pass through gaps in the foliage and reach the ground. After processing, you can separate ground points from vegetation points and build a true bare-earth model.

Comparison

Photogrammetry LiDAR
Sensor Camera Laser scanner
Colour and texture Excellent Added from a camera, not native
Ground under trees Poor Good
Flat open sites Excellent Excellent
Equipment cost Lower Higher
Best for Orthomosaics, visual inspection, progress Terrain under vegetation, corridors, contours

When to choose LiDAR

  • Railway, road or pipeline corridors that pass through forest or scrub.
  • Terrain models for design where ground height must be right.
  • Fine contours, for example at 0.5 m intervals.
  • Sites where you also want to look for power lines and thin structures.

Our LiDAR work has included a 50 km railway doubling project in Goa and contour generation for a mining plant. See our LiDAR service.

When to choose photogrammetry

  • Open or built-up sites where the ground is visible.
  • You need a colour map people can read and measure.
  • Progress monitoring, volumes of stockpiles and visual inspection.
  • Budget matters and the terrain is simple.

Use both

Many projects combine them: LiDAR for the bare-earth terrain and photogrammetry for the colour orthomosaic. The two layers line up in WebGIS, so you can switch between them. If you are unsure, tell us about the site and we will recommend a method. Start with the basics in our guide to photogrammetry.

Next step

See it live in a quick call

Tell us what you do. We will show you the products and hardware that fit, on a short video call.

Book a quick call Chat on WhatsApp