A drone survey rarely delivers just one file. The three you will hear about most are the orthomosaic, the DSM and the DTM. They come from the same flight but answer different questions.
Orthomosaic: the map you can see
An orthomosaic is a single, stitched image of the whole site. Unlike a normal aerial photo, it is corrected for camera tilt and terrain so that distances on the image match distances on the ground. It is also georeferenced, so every pixel has a real-world position.
Use it for: measuring lengths and areas, marking boundaries, checking progress, spotting encroachment and as the base map in GIS and CAD.
DSM: the height of the surface
A Digital Surface Model records the height of whatever is on top: roofs, trees, vehicles, stockpiles and the ground between them.
Use it for: building and structure heights, skyline and line-of-sight checks, volumes of stockpiles and anything sitting on the ground.
DTM: the bare ground
A Digital Terrain Model removes buildings, trees and other objects and keeps only the ground surface.
Use it for: drainage and water-flow analysis, road and railway design, earthwork cut and fill, and contours of the real terrain.
Side by side
| Orthomosaic | DSM | DTM | |
|---|---|---|---|
| Shows | Colour image | Surface height | Ground height |
| Includes buildings and trees | Yes | Yes | No |
| Typical use | Mapping, measuring | Heights, volumes | Drainage, design |
Which one do you need?
Most projects need all three. The orthomosaic tells you what is there, the DSM tells you how high it is, and the DTM tells you what the ground looks like underneath. From the DTM we can also generate contours at fine intervals.
Under dense vegetation, a photogrammetry DTM can be unreliable because the camera cannot see the ground. In that case consider LiDAR.
See them in a browser
In WebGIS you can switch between the orthophoto, DSM, DTM and contours, measure on any layer, and compare surveys from different dates. Read the background in our guide to photogrammetry.